Arcade Ranger trackball sensitivity

Useful Answer

If Arcade Ranger recognizes the trackball in MAME but Golden Tee or similar games feel extremely slow, adjust the in-game analog controls rather than treating it as a hardware failure.

Recommended path:

1. Assign L3 to a button first.
2. Open the MAME menu.
3. Go to Analog Controls.
4. Raise both Analog X Sensitivity and Analog Y Sensitivity.
5. Retest the trackball in the game.

If the trackball works normally on a PC but is only slow inside Arcade Ranger, that points toward game/emulator configuration rather than a bad trackball.

If the sensitivity works during the current session but resets after exiting and reopening Arcade Ranger, treat that as an Arcade Ranger / game-side save issue. The best next step is to report the bug to the Arcade Ranger developers, such as through their Discord or support channel.

Source Context

The customer reported that the Arcade2TV-XR trackball worked normally on PC but had very low sensitivity in Arcade Ranger MAME games such as Golden Tee. Support provided the L3 plus MAME Analog Controls sensitivity path, and the customer confirmed it worked. When the sensitivity setting did not persist after exiting Arcade Ranger, support identified that behavior as likely game-side rather than an X-Arcade hardware issue.