GRS servo gate switcher with Arcade2TV-XR

Useful Answer

GRS servo gate switchers can work with the Arcade2TV-XR joystick area, but they are not a direct plug-in to the stock controller board.

Support has successfully used ThunderStick Studio auto-switching gates with Arcade2TV-XR. Ultimarc ServoStick was not specifically tested in that exchange, so avoid promising exact fit for untested models.

The customer needs two things:

• A GRS 2-in-1 switch button or equivalent control button to change the gate mode.
• USB power for the gate switcher.

For USB power inside the Arcade2TV-XR, support recommended the spinner add-on because it adds two internal USB ports. Those internal USB ports can power accessories such as the GRS gate switcher.

This setup is useful when the customer wants to switch between 4-way and 8-way joystick behavior without opening the unit each time.

Source Context

The customer asked whether GRS servo gate switchers for Sanwa-style joysticks could be connected inside an Arcade2TV-XR. Support confirmed they could work, but explained that the gate switcher needs its own switching button and USB power from the spinner add-on. The customer accepted the answer and ordered the spinner module. A separate 4-way/8-way joystick question confirmed support had successfully used ThunderStick Studio auto-switching gates with Arcade2TV-XR, while noting that Ultimarc ServoStick had not been tested.