X-Arcade Tankstick LT/RT Buttons Not Mapping in RetroPie (Mode 4 / X-Input)
Scope and initial checks
This article concerns a Tankstick with an identified Tri-Mode PCB in Mode 4 (XInput) on RetroPie. It is not an original-XR, XR MAX or Batocera procedure. Record the actual distribution/version, board, mode, frontend and affected game/core first. Confirm the physical controls separately on a PC; working Mode 1 keyboard input does not by itself verify the Pi's Mode 4 mapping.
For the documented Raspberry Pi 4b / RetroPie 4.7.11 setup, the general Pi guide describes the xpad driver path for Tri-Mode Mode 4. Check the instructions matching the actual image; do not install Xarcade2Jstick merely because an older keyboard-only model used it. See How to Use X-Arcade with Raspberry Pi.
A confirmed historical configuration rebuild
One customer reported that all controls passed the Mode 1 test but EmulationStation did not detect LT/RT in Mode 4. An ordinary Xbox controller registered on the same Pi. The customer twice confirmed that clearing RetroArch autoconfiguration at /opt/retropie/configs/all/retroarch/autoconfig and rebuilding controller mappings in EmulationStation, starting with the Tankstick and then the other controllers, restored the missing inputs. A different community workaround failed for that customer.
The exact Pi model, image version and conflicting profile were not identified. This supports a scoped configuration-rebuild outcome, not a universal root-cause diagnosis, a required long-press recipe or a guarantee that deleting every profile fixes every Tri-Mode setup. A separate reviewed Batocera case did not improve after configuration clearing.
Preserve mappings before a supported rebuild
Keep a restorable backup of working controller configurations before resetting anything. A broad clear removes other controllers' mappings; do not delete every profile as the first step. Use the actual distribution's supported rebuild guidance or ask its maintainer which profiles need review. Do not copy a RetroPie path or menu to Batocera or another image.
After rebuilding, verify both players and LT/RT in frontend setup, then test the intended game/core and the other controllers. A frontend mapping result is not proof every emulator is configured. If the inputs remain absent, report the working PC test, exact image/core, input mode and failed rebuild rather than repeatedly clearing profiles or guessing a firmware change.
Source article: <https://support.xgaming.com/support/solutions/articles/12000107907-x-arcade-tankstick-lt-rt-buttons-not-mapping-in-retropie-mode-4-x-input->