Hyperspin frontend and the X-Arcade

HyperSpin is an animated arcade frontend for Windows for use on Home Arcade Machines. HyperSpin allows you to create custom menu systems to run most executables with that arcade look and feel. HyperSpin takes a more artwork-oriented approach to creating menus. With this tool, you should be able to make interesting menus for your games, movies etc. Simply put, HyperSpin is likely the best-looking emulation front-end ever devised and makes emulation setup easier.

We have made getting HyperSpin up and running easy if you follow our simple guide below, but if you use other directories or versions of MAME than those outlined here, then you will be on your own as we don't offer support for any of this.

Easy HyperSpin setup for MAME™:

  1. Download and install this MAME™ as instructed, use OPTION 2 Commandline.
  2. Download HyperSpin (registration required), install it to the default location.
  3. Open HyperHQ, click on the Wheel Settings tab, choose MAME from the drop-down list, and next to Executable put "C:\MAME\mame64.exe" without the quotes. Also put "C:\MAME\roms\" next to Rom path. NOTE: These settings only work with the version of MAME linked in 1, if you are using a different version of MAME point them to your executable location.
  4. In HyperHQ, click on the Control tab, Keyboard sub-tab, then set up the controls to your liking. An example layout is shown below. If you have a trackball click on the Trackball tab and put a check to enable it.

hyperhq settings.jpg

Hyperspin Documentation and Help

Hyperspin User-Created Guide

Mapping X-Arcade TankStick to Multiple Emulators (AHK Script)

HyperSpin GUI Button Layout:

| Function: | X-Arcade | | --- | --- | | Scroll Up | Up | | Scroll Down | Down | | Skip Up | Left | | Skip Down | Right | | Skip Up Number | Button 7 | | SkipDownNumber | Button 8 | | HyperSpin (fast scroll) | Hold B5 while moving Up/Down | | Select Game | Start Button | | Navigate Back/Exit Game | ESCAPE | | Exit HyperSpin | ESCAPE |

Hyperlaunch: If using Hyperlaunch, the Q and S keys are disabled unless you apply this workaround.

More help: HyperSpin Forum

Trackball:

You can enable Trackball/Spinner/Mouse support simply by enabling them on the trackball and spinner tabs. The threshold slider simply sets the amount you have to spin your trackball/spinner before you see actual wheel movement in the menu. Note that this only enables the mouse/trackball in Hyperspin itself, not in MAME.


Source article: <https://support.xgaming.com/support/solutions/articles/12000003062-hyperspin-frontend-and-the-x-arcade>

Dolphin GameCube input works separately from HyperSpin menus

Scope: a Windows PC using a Tankstick that sends keyboard keystrokes. The confirmed case used its existing programmed Mode 2, which already worked in other emulators. This is not an XR MAX mode-number instruction, a console-adapter procedure or a guarantee for every Dolphin build/game.

  1. Keep the working Tankstick profile and other emulator mappings. Open Dolphin directly first.
  2. Open Controllers. Under GameCube Controllers, set Port 1 to Standard Controller, then choose Configure.
  3. Select the keyboard or keyboard/mouse entry in Dolphin's Device list for this keyboard-output Tankstick profile.
  4. Select an input field and press the intended Tankstick button or direction. Use Control Stick for games that need the main GameCube stick; map D-Pad separately when the game uses it.
  5. Save the configuration and test the game directly in Dolphin. Then launch the same game through HyperSpin. A reviewed customer explicitly confirmed this mapping guidance worked. It does not establish analog-stick or pressure-sensitive-trigger equivalence for digital arcade controls.
  6. If direct Dolphin input works but a HyperSpin launch does not, compare the executable and configuration used by the frontend. That is a diagnostic branch, not a confirmed cause from this case.

Frontend navigation and success in another emulator do not automatically configure Dolphin. If input also fails outside Dolphin, identify the exact Tankstick board/profile and test its output before changing firmware or global mappings. A later need to press the rear programming button twice after PC power-off was a separate, unresolved startup question; it was not evidence that Dolphin mapping had failed. Older SAVE/LOAD models have specific recall behavior in the programming guide. Identify the board before applying that behavior or promising automatic recall.