What would you like to do?
Pick one to get started — we'll guide you the rest of the way.
Works in Chrome or Edge, on PC or Mac.
Connect your Arcade2TV XR
Plug in your controller, then click Connect.
Works in Chrome or Edge — pick “Arcade2TV” when asked.
Rear knobs and button swapping
Connect the rear USB data cable to your computer. Set CONNECTION to W (Wired) or C (Console), and MODE to 1 (Keyboard), 2 (DInput), or 5 (DKM: DirectInput + Keyboard + Mouse, for PC virtual pinball games). BT, 2.4G and XInput do not support software remapping.
Changing CONNECTION restarts the controller. The flashing lights show the selected input mode again. Wait for reconnection before editing. The configurator cannot read the W/C knob position separately.
Software remapping assigns outputs to controls. On-device swaps and copies are separate: save your remapping first, then perform and save the swap. Software reset does not clear on-device swaps.
To clear swaps in the current mode, hold P2 MODE + Reset for 5 seconds and release after three red flashes. This is not the configurator reset.
Factory button reference
Factory button reference
Manual v1.38 defaults, not live assignments. Changing this reference does not change the controller mode.
Your Controller
Press a button or click a slotAssign Function
Select a button slot firstFirmware updates only
Before updating or recovering XR Max or Pinball FX Edition firmware, connect with the official USB-C data cable included with your X-Arcade controller. Do not use third-party cables: they can cause the update to fail and leave the controller in Downloader mode. Once an update starts, keep the cable connected until it finishes.
Which device needs the update?
Pick the device you physically plugged in. We'll ask you to select it next.
What do you use the controller for?
Arcade2TV-XR
Arcade2TV-XR Max
The USB dongle is updated separately under Wireless Dongle.
Wireless Dongle
How to update — step by step
Update Firmware
Drop firmware .bin here
or click to browse — only official Arcade2TV XR firmware files
Force upgrade / roll back
Firmware files & support
All done — what next?
Your firmware is installed. You can unplug the device and start playing, or pick an option below.
Update didn't finish? We'll help you fix it.
Send us a quick diagnostics report and our support team will get you sorted:
- Download the diagnostics report using the button below.
- Email it to support@xgaming.com — the button opens your email; attach the file you just downloaded.
- Before retrying, try another USB port on your computer. If your device uses a cable, use only the official cable supplied with your X-Arcade device, not a third-party cable.